How To Setup VPN For XBOX 360

Date:
Share:

1: Setup VPN For XBOX 360 When you are using wireless connection with PC/Laptop.

Prerequisites:

a: A ethernet cable.

b: VPN Services.


1.1: Download FlyVPN client, install and run it. Please visit this page to connect FlyVPN. Then you can see FlyVPN connection under “Network Connections” have been established.




1.2: Right click on FlyVPN connection and go to its properties.

a: Click “Sharing” tab.

b: Select  either Local Area Network or XBOX 360/PS3 (if that appears) in the “Home network connection”.

c: Check "Allow other people to use this connection" box.

d: Click “OK” .Then your FlyVPN connection has been shared.




1.3: Double click FlyVPN connection, input your FlyVPN account and password. Click “Connect”. Then your are connected FlyVPN successfully on PC/Laptop.




1.4: Plug your XBOX 360 to your PC/laptop with ethernet cable. Make sure on your XBOX 360 dashboard your IP settings and DNS Settings are set to automatic.


1.5: XBOX 360 can surf via FlyVPN connection.



2: Setup VPN For XBOX 360 When you are using wired connection with PC/Laptop.

Requirements:

a: An ethernet cable .

b: A wireless router with at least two LAN port.


2.1: Click here to download FlyVPN client, Install and run it. Connect FlyVPN successfully to establish FlyVPN connection. Then you can see FlyVPN connection under “Network Connections”. 




2.2: Double click FlyVPN connection and go to its properties.

a: Click “Sharing” tab.

b: Select  either Local area connection or XBOX 360/PS3 (if that appears) in the “Home network connection”.

c: Check "Allow other people to use this connection" box.

d: Click “OK”. If a windows about change LAN adapter pops up.Click “Yes”. Then FlyVPN connection has been shared.





2.3: Right click "Local Area Connection" - "Properties" - "Internet Protocol Version 4(TCP/IPv4)" - "Properties". Check "Obtain an IP address automatically" and "Obtain DNS server address automatically" boxes. Then click "OK".




2.4: Input "cmd" into start menu search box and press "enter" key .




2.5: Input "ipconfig"and press "Enter" key. Write down the IPv4 address under “Ethernet adapter local area connection”.




2.6: Double click FlyVPN connection and input your FlyVPN account and password, click “Connect” to connect FlyVPN successfully on PC.




2.7: Plug your XBOX 360 to wireless router LAN port through Ethernet cable .Go to XBOX 360 IP setting manually.

a: IP address: Keep the last digit different from “Ethernet adapter local area connection IPv4 address” you have written it down. For example, Ethernet adapter local area connection IPv4 address is 192.168.1.100. You can enter 192.168.1.99 or other IP address except 192.168.1.100.

 b: Default gateway: Same as “Ethernet adapter local area connection IPv4 address”.

 C: Preferred DNS server: Same as “Ethernet adapter local area connection IPv4 address”.


2.8: Go to test XBOX 360 network. Then you can connected FlyVPN connection on XBOX 360.

Discount Close Notice